Intermec PA30, Руководство пользователя, Страница: 30 / 143

Chapter 1 — Learning About the PA30
18 PA30 Print Engine User’s Manual
13
Slide the green edge guides to the media edge. The guides
should be adjusted so the media passes through the printhead
with a minimum of play.
Edge Guides: Adjust the guides to the edge of the media.
14 Close the PA30 access door.
15 Perform a testfeed to align the media properly. For help, see
the next section.
Performing a Testfeed
After you install media in the PA30, follow the next procedure to
align the media with the label stop sensor.
To perform a testfeed
1 Press the Power switch to turn on the PA30. After the PA30
initializes, you see this in the display:
2
On the PA30 front panel, press Setup . The PA30 enters Setup
mode.
3
Press the right arrow key several times until this text appears
in the display:
Edge guides