Intermec PA30, Руководство пользователя, Страница: 131 / 143

Chapter A — Specifications
PA30 Print Engine User’s Manual 119
S-Style Port
11 End print Output Drives an applicator or other external device requiring
synchronization with the print cycle. Choose between five
types of output signals:
• Mode 0: Applicator port is OFF.
• Mode 1: Asserted LOW only when media is moving,
otherwise de-asserted HIGH.
• Mode 2: Asserted HIGH only when media is moving,
otherwise de-asserted LOW.
• Mode 3 (Default): Asserted LOW for 20ms when label
has finished printing and positioned. Not asserted
during continuous printing.
• Mode 4: Asserted HIGH for 20ms when label has
finished printing and positioned. Not asserted during
continuous printing.
12 Media out Output Goes LOW when the PA30 is out of media.
13 Ribbon out Output Goes LOW when the PA30 is out of ribbon.
14 Data ready Output Goes LOW when ready to print. De-asserted HIGH
whenever printing stops after the current label.
15 VOID Output RFID error signal:
Asserted LOW when the RFID tag is bad and the VOID
signal is active.
De-asserted HIGH when the End Print signal is asserted.
Z-Style Port Pinouts (continued)
Pin Signal Type Description
8
7 1
14
S-Style Port Pinouts
Pin Signal Type Description
1 Media out Output Goes LOW when the PA30 is out of media.
2 Signal ground Ground Configurable for internal or external source.