Intermec PA30, Руководство пользователя, Страница: 63 / 143

Chapter 3 — Configuring Communication Settings
PA30 Print Engine User’s Manual 51
3
Choose settings from the drop-down lists, or specify values in
the entry fields. For more information, see the next table.
4 Click Submit Setup . The settings are saved.
Changing the Standard I/O Port
By default, the PA30 communicates with a host PC via the serial
port, also known as “uart1:”. You can change the default I/O port
by using the web browser interface.
To change the default I/O port
1 From the menu, click Printer > Web Shell . The
Configuration [Web Shell] screen appears.
Serial Communication Settings
Setting Description
Baud Rate Baud rate for serial communications with a host
PC. Default is 9600.
Data Bits Number of bits defining a character. Default is 8.
Parity Default is None.
Stop Bits Number of bits defining the end of a character.
Default is 1.
RTS/CTS Enable or disable.
ENQ/ACK Enable or disable.
XON/XOFF
Data to Host Enable or disable.
XON/XOFF
Data from Host Enable or disable.
New Line New line character. Default is CR/LF.
Receive Buffer Receive buffer size in bytes. Default is 1024.
Transmit Buffer Transmit buffer size in bytes. Default is 1024.
Note: The PA30 can print a list of the current serial
communication settings. For more information, see “Printing
Test Labels and Setup Information” on page 96.
Note: You can also change the standard I/O port from the
Intermec Shell program. For more information, see “About
Intermec Shell” on page 88.