Intermec PA30, Руководство пользователя, Страница: 104 / 143

Chapter 6 — Using the Intermec Shell Program
92 PA30 Print Engine User’s Manual
As long as a continuous string of characters is being received, the
program wraps the lines until the label is full and then starts to
print another label. At the bottom of each label, the following
information is printed:
• Page number
• Number of characters printed on the label
• Total number of characters received so far
After the Line Analyzer has been selected and the printer has
started up again, the printer feeds out two labels and the
following menu is displayed:
Line Analyzer
Sel.port(1-8) 1
Enter the desired communication port using the numeric keys on
the printer’s keyboard:
• 1 = “uart1:”
• 2 = “uart2:”
• 3 = “uart3:”
• 4 = “centronics:”
• 5 = “net1:”
• 6 = “usb1:”
• 7 = “uart4:”
• 8 = “uart5:”
If the printer is not fitted with the specified port, an error
message appears in the display and you can select another port:
Line Analyzer
Error:56