Intermec PA30, Руководство пользователя, Страница: 133 / 143

Chapter A — Specifications
PA30 Print Engine User’s Manual 121
External Power Port
7 Reprint Input Enables Reprint mode via software. When this mode
is enabled, assert LOW to reprint last label. This
input is ignored when Reprint mode is disabled.
8 5V sensor
reference Input 5V sensor reference.
9 Reserved
10 Ribbon low Output Goes HIGH when the amount of ribbon on the
unwind shaft is approximately 14 m (46 ft). Output
is LOW when the ribbon is completely out.
11 Reserved
12 +24VDC Output Power for external devices: +24VDC (±10%) @2A.
13 +5VDC Power Voltage supply for external sensors. Configurable for
internal or external source.
14 Power ground Ground +24VDC return.
S-Style Port Pinouts (continued)
Pin Signal Type Description
1
2
6
5
4
3
External Power Port Pinouts
Pin Signal Type Description
1 +5VDC Input +5VDC input for distribution through Applicator Port
connector (Z-Style pin 2, S-Style pin 13).
2 Signal ground Input Signal return for +5VDC supply (Z-Style pin 1, S-Style pin 2).
3 +24VDC Input +24VDC input for distribution through Applicator Port
connector (Z-Style pin 7, S-Style pin 12).
4 Power ground Input Power return for input (Z-style pin 8, S-style pin 2).