78
Intermec EasyLAN 100i – User's Manual Ed. 1
Chapter 8 Configuration & Management
Using Setup Mode
When an EasyLAN 100i interface board is installed, a few extra
options will appear in the display when you enter the Setup Mode.
Using the printer's built-in keyboard, you can navigate through the-
ses options and change them if necessary.
The diagram below illustrates the hierarchy of the additional setup
options.
The Setup Mode provides a convenient way of setting up the printer's
network addresses, provided you have physical access to the printer.
Once the network connection has been established, you can use the
EasyLAN 100i home page to further configure both the printer and
the EasyLAN 100i print server. Refer to the EasyLAN 100i Instal-
lation Instructions for explanations in greater detail.
• Press Setup key to exit the Setup Mode.
SETUP:
NET-COM, NET1
SETUP:
PRINT DEFS
SETUP:
MEDIA
SETUP:
FEEDADJ
SETUP:
SER-COM, UART1
Standard Setup Mode
See diagram #2 in printer's
Installation & Operation Manual
Standard Setup Mode
See diagram #1 in printer's
Installation & Operation Manual
Use keys . and 0–9 to set IP address
manually. Use C-key to erase.
Use keys . and 0–9 to set netmask
manually. Use C-key to erase.
Use keys . and 0–9 to set default router
manually. Use C-key to erase.
Set addresses manually
Select character(s) specifying
new line in data sent from
EasyLAN 100i pcb.
Read received addresses
First displayed option
indicates current setting.
Use F4 or F5 key to scroll
First displayed option
indicates current setting.
Use F4 or F5 key to scroll
NETWORK:
IP SELECTION
SETUP:
NETWORK
NETWORK:
IP ADDRESS
IP ADDRESS:
192.168.1.79
NETMASK:
255.255.255.0
NETWORK:
NETMASK
NETWORK:
DEFAULT ROUTER
DEFAULT ROUTER:
192.168.1.1
RARP
BOOTP
DHCP
IP SELECTION:
MANUAL
CR
LF
NET-COM,NET1:
NEW LINE
NEW LINE:
CR/LF
Read addresses
F4
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Setup
Enter
Enter
Enter
F5
F4
F5
F5
F5
F5
F4
F5
F4
F5
