Intermec EasyLAN 100i – User's Manual Ed. 1
43
Chapter 5 Setting Up – Windows
Client-Server Printing – Server Setup
Follow the instructions below to install your EasyLAN 100i for
client-server printing at a Windows for Workgroups server:
1. Choose a workstation that you want to use as a server for net-
work printing. The server must be available at all times and must
have sufficient hard disk space for spooling print jobs.
2. Open Network Setup, click Sharing..., check the I want to be
able to allow others to print to my printer(s) box.
3. Install AXIS Print Utility for Windows on the server.
4. Set up your EasyLAN 100i as described under
“Peer-to-Peer
Printing”
, on previous page.
5. Open Print Manager and select your printer.
6. In the Printer menu, select Share Printer As...
7. Type a printer name in the Share As field (this is the printer
name seen by the clients, see Client Setup below). Check the
Re-share at Startup box, then click OK.
The server setup is now completed. Set up the clients as described
below.
Note: The AXIS Print Utility for Windows must be running when
you print through your EasyLAN 100i. We strongly recommend
that you copy the AXIS Print Utility icon into your StartUp folder.
Client-Server Printing – Client Setup
Follow these steps to use your EasyLAN 100i for client-server print-
ing at a Windows for Workgroups client:
1. In the Control Panel, select Printers.
2. Select a printer driver from the list of Installed Printers, or click
Add>> to install a new driver. Click Connect...
3. Select Network... in the Device Name list, select a local port
(LPT1 - LPT3) to redirect to your network printer.
4. In the Show Shared Printers on list, select the server from Server
Setup above.
5. In the Shared Printers list, select the printer you want to use.
6. Click OK, OK, and Close.
7. Exit the Control Panel.
The client setup is completed and you can now print through your
EasyLAN 100i.
Windows 3.1 and
Windows for
Workgroups,
cont'd.