30
Intermec EasyLAN 100i – User's Manual Ed. 1
Chapter 5 Setting Up – Windows
Using the AXIS Print Monitor with Windows 95/98
Follow the procedures below to install Axis printer ports from a
Windows 95 or Windows 98 workstation:
NetBIOS/NetBEUI
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. After clicking Next> in the first dialog, the Wizard asks you to
select Local printer or Network printer. Select Local printer as
the EasyLAN 100i emulates a local printer port. Click Next>.
3. Choose the Intermec printer driver in the displayed Manufactur-
ers list, then select the appropriate printer from the Printers list
and click Next> to proceed directly to step 6. It is only necessary
to perform steps 4 –5 if your printer does not appear in the model
list.
Note: If you are not certain that the desired printer driver avail-
able in the Manufacturers and Printer Models list is the latest
version, you are advised to use the printer driver provided on
the CD delivered with the EasyLAN 100i.
4. Click the Have Disk... button. Insert the CD that was provided
with your printer, select the CD drive and click OK.
5. Select the printer driver
i
n the *:\Interdrv\DP folder on the CD
and click Next>.
6. Select the AXIS Printer Port from the Available Ports list. The
port name appears as <name>.FIF, where <name> is ITC fol-
lowed by the last six digits of the EasyLAN 100i serial number,
e.g. ITC003610. Click the Configure Port button.
7. Choose whether error condition pop-up messages are to be dis-
played by checking the box in the Configure AXIS Printer Ports
dialog. Define the frequency at which the error messages should
be displayed after retry. Click Next>.
8. Enter an appropriate name for your printer and click Finish.
Windows 95 and
Windows 98
