Intergraph TDZ 2000, Настройка системы

Страница: 85 / 98

73
To configure IDE/ATAPI Bus Mastering:
1. Use Windows Explorer to navigate to the \
SUPPORT
\
UTILS
\
I
386 directory on the Service
Pack CD-ROM.
2. Double-click
DMACHECK
.
EXE
. The ATAPI DMA Support dialog box displays. The
Current DMA Usage boxes indicate which channels (0, 1, or both) have IDE/ATAPI
devices.
3. Click the Enabled button for each channel with IDE/ATAPI devices.
4. Click OK.
5. Restart the system.
Configuring the Sound Driver
If you reinstall Windows NT and the associated system software, you must configure the
sound driver to ensure quality recording capability. If you have an MPU-401 device or a
joystick, you must also install the appropriate drivers.
To configure the sound driver:
1. Click Start, Programs, Accessories, Multimedia, and then click Volume Control. The
Master Out window displays.
2. From Options, click Properties. The Properties dialog box displays.
3. Click Playback. In the Volume Controls list, click Master Out, SRS, Wave, and CD;
then click OK.
4. In the Master Out window, set all volume sliders to maximum.
5. From Options, click Properties. The Properties dialog box displays.
6. Click Recording. In the Volume Controls list, click Master Record and Mic; then click
Close.
7. In the Master Record window, set all volume sliders to maximum.
8. From Options, click Properties. The Properties dialog box displays.
9. Click Other. In the list, click Mic; then click Close.
10. In the Low Priority Input window, set the volume slider to maximum.
11. From Options, click Exit.
To install a compatible MPU-401 device driver:
1. Click Start, click Settings, and then click Control Panel.
2. Double-click Multimedia and click the Devices tab.