Intergraph TDZ 2000, Настройка системы

Страница: 80 / 98

68
Installing Windows NT Workstation 4.0
System Software
Depending on your system’s configuration, you will need some or all of the following system
software during the installation process:
u
SCSI driver
u
Video display driver
u
Network adapter driver
u
Sound processor driver
u
Mouse driver
u
QFE update software
Installation Guidelines
Follow the instructions in Start Here to install Windows NT.
Do the following during installation of the operating system:
u
When prompted, install the Intel network driver for the on-board 82557-based PCI
EtherExpress driver from backup diskette instead of from the operating system software
CD-ROM.
u
Select Custom Setup when prompted to select a Setup type.
u
Select automatic detection of mass storage devices during Setup.
u
Do not select automatic detection of network driver and allow Setup to configure the
network only if the system is connected to the network.
u
Create an Emergency Repair Disk when prompted to do so.
Do the following after installation of the operating system:
u
Install drivers—including those for video, sound, and SCSI—and other system software
from backup diskettes. System software on backup diskette is usually more current than
system software on the operating system CD-ROM.
u
Install the latest Windows NT Service Pack software from CD-ROM to update the
operating system. See “Getting Operating System Updates” on page 74 for details.
u
Complete additional installation tasks in this chapter as necessary.
u
Configure the system as described in Chapter 3, “Configuring the System.”