Intergraph TDZ 2000, Настройка системы

Страница: 67 / 98

55
u
While the system is running, momentarily press the Standby button.
Setting Time in the Automatic Shutdown Utility
By default, the Automatic Shutdown Utility is set for a 10-second delay when starting
shutdown. You can use the slider under Time Remaining to set the delay up to 30 seconds.
You should not set the delay to less than 5 seconds, to ensure that you have time to stop
system shutdown if needed.
Configuring the Automatic Shutdown Utility
Before you use the Automatic Shutdown Utility, you must configure it. Double-click the
Automatic Shutdown Utility icon in the taskbar tray. The Automatic System Shutdown
dialog box displays.
Choose a shutdown option and click Apply, then click Start Shutdown. After you start the
system again, the utility will use the settings you selected.
Select from the following options in the Automatic Shutdown Utility dialog box:
u
Shutdown the Computer: Starts the standard Microsoft Windows shutdown. This
option saves any windows settings that you changed, writes information that is currently
in memory to the system’s hard drive, and prepares the system to power down.
When the system is shut down, press the Standby button to power down the system, or
click the Restart button to restart the system
u
Power down the Computer: Performs an orderly shutdown of the operating system, and
powers down the computer. This option saves any windows settings that you changed,
writes information that is currently in memory to the system’s hard drive, and then turns
off power to the system.
u
Shutdown System and Restart the Computer: Restarts the system. This option saves
any windows settings that you changed, writes information that is currently in memory
to the system’s hard drive, and powers down and restarts the system.
u
Close All programs and log on as different user: Closes any open windows or programs,
disconnects the system from the network, and returns the system to the Windows logon
prompt. This option prepares the system for use by someone else.
In addition to the above shutdown options, the Automatic Shutdown Utility provides the
following features:
u
Force All Processes to terminate: Terminates all programs if checked. If this option is
not checked, the system displays an End Task dialog for each process that may still be
running.