Intergraph TDZ 2000, Настройка системы

Страница: 28 / 98

16
Configuring the Video Display Driver
The first time you start the system, your monitor displays at 1024 x 768 screen resolution.
For the system to use the installed video adapter at other display resolutions, you must
configure the video display driver as described in this section.
NOTE RealiZm II is the only graphics system discussed in this docume nt. If you purchased the
system with another graphics system, see the separate video display adapter documentation
for installation and configuration information.
About RealiZm II Video Display Adapters
RealiZm II video display adapters are 3D graphics accelerators. These graphics accelerators
provide a number of advanced graphics features, including hardware acceleration of OpenGL
and Windows NT graphics features, texture processing, and geometry acceleration. For
more information about RealiZm II graphics, see the video display adapter documentation
delivered with the system.
Using the Display Properties Dialog Box
Open Display in the Control Panel to configure the video display driver. Use the Settings tab
in the Display Properties dialog box to change the color depth, desktop size, font size, refresh
rate, and display type. To determine which video display adapter is installed on your system,
click the Display Type button. Use the controls on the Hardware Settings tab to change the
monitor type, screen display, and preferences.
For detailed information on configuring the video display driver, see the video display
adapter documentation and Help delivered with the system, and the
README
.
TXT
files
delivered with the video display drivers.
3D Display Performance and Full Drag (RealiZm II)
If you use 3D applications with the RealiZm II video display driver, the video display may
update slowly when you drag objects across it. To avoid this inconvenience, turn off full
drag before using 3D applications with these video drivers.
To turn off full drag:
1. Open Display in Control Panel.
2. Click the Plus! tab.
3. Click to deselect the Show Window Contents While Dragging checkbox.
4. Click OK.