Intergraph TDZ 2000, Настройка системы

Страница: 54 / 98

42
8. Remove the diskette from the floppy disk drive; then power off and restart the system.
9. When the following message displays, press
DELETE
:
Hit DEL if you want to run Setup
NOTE It is normal to see a message similar to the following:
CMOS SETTINGS WRONG
PRESS F1 TO RUN SETUP
10. In the Default menu of AMIBIOS Setup, click the Optimal icon. Select Yes to load the
values.
11. If you customized the BIOS for your system, change the necessary parameters to their
previous values.
12. Select Exit and Save to exit AMIBIOS Setup.
13. Restart the system.
Assigning System Resources for Option Cards
Some ISA cards, PnP cards, PC cards (PCMCIA), and non-compliant PCI cards include a
configuration diskette that you can use to reserve the system resources required for the board.
Other option boards and PC Card devices do not include a diskette, but require that you
manually enter the configuration information.
Refer to the documentation delivered with the option card to determine the resources that
provide the best performance for the adapter. Use AMIBIOS Setup to assign the resources
for each option card.
u
To assign resources for ISA option cards, change these parameters under the “PCI/PnP”
submenu:
−
DMA Channel x Usage: Change to ISA
−
IRQ x Usage: Change to ISA
−
ISA Reserved Memory Size: Change as appropriate to allocate the required amount
of memory for ISA option cards that require a fixed amount of memory.
−
ISA Reserved Memory Address: Change as appropriate to allocate the required
memory for ISA option cards that require a set location. The available values
depend on the amount of memory allocated in the ISA Reserved Memory Size
parameter.
u
To assign resources for PC, PnP, and non-compliant PCI option cards, change the PCI
Slot x IRQ Priority parameter under the “PCI/PnP” submenu, as described in the
documentation delivered with the option card.