Intel® Server System R2600SR Setup and Service Guide
60
To replace the SMM battery, complete the following steps:
Figure 50.
SMM battery location
1.
Locate the SMM battery (see Number 1).
Figure 51.
Replacing the SMM battery
2.
Using a fingernail, depress the battery retaining clip (see Letter A). The battery should pop free.
3.
Lift the battery up from the socket (see Letter B).
4.
Position the battery over the socket and tilt the battery so that it can inserted into the socket, positive
side up.
5.
Slide the battery into place and gently press the battery down into the socket until it clicks into place.
Note: Avoid lifting the battery with excessive force. Failing to remove the battery properly may damage the
socket on the SMM assembly. Any damage to the socket may require replacing the SMM assembly.
After replacing the battery, the system time settings must be reconfigured.
Dispose of the battery as required by local ordinances or regulations.
Follow any special handling and installation instructions that come with the replacement battery.
Содержание R2600SR Series
Страница 2: ...Blank page...
