Intel R2600SR Series, Руководство по установке и обслуживанию

Страница: 52 / 85

Intel® Server System R2600SR Setup and Service Guide
46
<s/n>
The serial number on the solution. Type
sn zzzzzzz
, where
zzzzzzz
is the serial number.
<asset_method>
The solution asset tag number. Type
asset aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa,
where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
is the asset tag number.
[access_method]
The access method that selected to use from the following methods:
 Online authenticated LAN access, type the command:
[−−imm imm_user_id:imm_ password@imm_internal_ip]
where:
imm_internal_ip
The BMC Controller internal LAN/USB IP address. The default value is 169.254.95.118.
imm_user_id
The BMC account (1 of 12 accounts). The default value is USERID.
imm_password
The BMC account password (1 of 12 accounts). The default value is PASSW0RD (with a zero 0 not
an O).
Note: If none of these parameters is selected, OneCLI use the default values. When the default values are
used and OneCLI is unable to access the BMC Controller using the online authenticated LAN access method,
OneCLI automatically uses the unauthenticated KCS access method.
Examples that use the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> onecli
config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n>
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag>

Online KCS access (unauthenticated and user restricted):
Do not specify a value for
access_method
when using this access method.
Note: The KCS access method uses the IPMI/KCS interface, which requires that the IPMI driver be installed.
The following commands are examples of not using the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName
<m/t_model> onecli config set
SYSTEM_PROD_DATA.SysInfoSerialNum <s/n>
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag>
 Remote LAN access, type the command:
Note: When using the remote LAN access method to access the BMC Controller using the LAN from a client,
the host and the imm_external_ip address are required parameters.