Intel® Server System R2600SR Setup and Service Guide
16
Figure 10. Installing the system chassis on the slide rails
4.
Tilt and lower the system chassis; then, push the slides towards it and make sure the farthest
nailheads go into the slots on the slides (see Number 1).
5.
Slowly lower the system chassis down and make sure the other three nailheads slip into the slots (see
Number 2).
Attention: The slides must be fully extended to successfully install the system chassis.
2.2.3
Sliding the System Chassis into the Rack
After the system is successfully installed and secured onto the rails, move it back into the rack into its
operational position.
Figure 11. Sliding the system chassis into the rack
1.
Push up the rear latches on the slide rails (see Number 1).
2.
Push the system chassis until the slide rails click into place (see Number 2).
3.
Push up the front latches on the rails (see Number 3).
4.
Push the system all the way back into the rack (see Number 4).
Содержание R2600SR Series
Страница 2: ...Blank page...
