Intel® Server System R2600SR Setup and Service Guide
41
3.9.2.1
Attaching the KVM Cable
Figure 38. KVM cable routing
Once the KVM module has been replaced, attach the KVM Breakout cable to attach the KVM module cable to
the KVM module, follow these steps:
1.
Connect cables to connectors as shown in Figure 38.
a.
Long signal cable (see Number 1) to the connector (see Number 3).
b.
Short signal cable (see Number 6) to the connector (see Number 4).
2.
Route both cables through the respective internal cable management baskets (see Numbers 2 and 5).
Содержание R2600SR Series
Страница 2: ...Blank page...
