manualshive.com logo in svg

Intel Pentium Pro Family, Руководство разработчика, Страница: 288 / 328

Поделиться
Скачать
Intel Pentium Pro Family Скачать руководство пользователя страница 288

17-24

OVERDRIVE® PROCESSOR SOCKET SPECIFICATION

17.6.4.2.

OVERDRIVE

®

 VRM CLEARANCE AND AIRSPACE REQUIREMENTS

Refer to Figure 17-6 for a drawing of the various clearance and airspace requirements of the
OverDrive VRM. Nothing must intrude into the space envelope, including airspace region, de-
fined in Figure 17-6 with the exception of Header 8 itself. 

17.6.5.

Functional Criteria

The OverDrive processor is intended to replace the original Pentium Pro processor. The system
must boot properly without error messages when the OverDrive processor is installed.

17.6.5.1.

SOFTWARE COMPATIBILITY

System hardware and software that operates properly with the original Pentium Pro processor
must operate properly with the OverDrive processor. 

17.6.5.2.

BIOS FUNCTIONALITY

The BIOS must continue to operate correctly with the OverDrive processor installed in the sys-
tem. Always use the CPU Signature and Feature flags to identify if an OverDrive processor is
installed. Please refer to the Pentium

®

 Pro Processor Developer’s Manual: Volume 3, Program-

mer’s Reference Manual (Order Number 242691) for the BIOS recommendations. 

ZIF socket lever operation.

Figure 17-4

Must operate from fully closed to fully open position with 
no interference.

Table 17-13.  Functional Test Criteria

Criteria

Refer To:

Comment

Software Compatibility

No incompatibilities resulting from upgrade installation.

BIOS Functionality 

Section 
17.3.3. 

• CPU Type Reported on Screen must be reported correctly 

or not at all. Intel recommends reporting “OverDrive

®

 

Processor”.

• Never Use Timing Loops.
• Do not test the cache, or use model specific registers 

when the upgrade is detected.

• Program MTRRs as for a Pentium

®

 Pro processor.

Table 17-12.  Mechanical Test Criteria for the OverDrive

®

 Processor  (Contd.)

Criteria

Refer To:

Comment

Содержание Pentium Pro Family









































































































































































































































































































































Отзывы:

Нет отзывов