Appendix A Parameter Table
- 59 -
Param.
No.
Param. Name
Setting Range
Default
Property
F0-04 Auxiliary frequency
reference Y selection
0: Digital setting (initial value F0-08 can be
modified by keypad or terminal UP/DOWN,
non-retentive at power failure)
1: Digital setting (initial value F0-08 can be
modified by keypad or terminal UP/Down,
retentive at power failure)
2: AI1
3: AI2
4: (Reserved)
5: Pulse setting (DIO1)
6: Multi-reference
7: Simple PLC
8: PID
9: Communication setting
10: Synchronization control
0
★
F0-05
Base value of range
of auxiliary frequency
reference Y for main
and auxiliary calcula-
tion
0: Relative to the maximum frequency
1: Relative to main frequency X
0
☆
F0-06
Range of auxiliary
frequency source Y
for main and auxiliary
calculation
0% to 150%
100%
☆
F0-07 Final frequency refer-
ence setting selection
Ones (Frequency source selection)
0: Main frequency reference X
1: Main and auxiliary calculation result
(based on the tens position)
2: Switchover between main frequency ref-
erence X and auxiliary frequency reference
Y
3: Switchover between main frequency
reference X and main and auxiliary calcula-
tion result
4: Switchover between auxiliary frequency
reference Y and main and auxiliary calcula-
tion result
Tens (X and Y superposition relationship)
0: Main + Auxiliary
1: Main - Auxiliary
2: Max. (main, auxiliary)
3: Min. (main, auxiliary)
4: Main x Auxiliary
0
☆
F0-08 Preset frequency
0.00 Hz to F0-10 (Maximum frequency)
50.00 Hz
☆
F0-09 Running direction
0: Run in the same direction
1: Run in the reverse direction
0
☆
F0-10 Maximum frequency 5.00 Hz to 600.00 Hz
155.00 Hz
★
