manualshive.com logo in svg

Inivos ProXcide, Руководство пользователя, Страница: 7 / 57

Поделиться
Скачать
Inivos ProXcide Скачать руководство пользователя страница 7

APRIL 2020 • REVISION 4.0 

INSTRUCTION MANUAL

7

2.1

 The ProXcide™ major components

The ProXcide™ is a bio-decontamination system that delivers vaporised ProXcin™ (containing 

hydrogen peroxide 

≤

 7.5%) to surfaces within an enclosed space. It is designed for use in 

commercial and healthcare settings. The ProXcide™ automatically adjusts every decontamination 

process to the specific environment, monitoring and adjusting for temperature, humidity 

and absorbency as well as to the volume of the room in order to ensure the same successful 

decontamination is achieved every time. The complete decontamination cycle includes the injection 

phase, ‘dwell’ phase, and a deactivation phase. The ProXcide™ system has a fully-integrated 

deactivation unit that very quickly deactivates hydrogen peroxide in the treatment space at the end 

of the decontamination process. The deactivation unit comprises a highly-e

ff

icient air-circulation 

system which passes the air through a catalyst to quickly reduce the concentration of atmospheric 

hydrogen peroxide. 

The ProXcide™ is made up of two major components:

1.

 

 

The main vapour generating unit

 

– is placed inside the sealed room where it carries out the 

disinfection process. This consists of injection, deactivation and process control modules. 

The main unit carries out a series of checks before enabling decontamination, and continually 

monitors the humidy in the room to ensure the decontamination cycle is e

ff

ective and 

completed successfully. The main unit is powered from 230V mains.

2.

 

  The process monitor

 – is placed outside the room and is used to start the process. To ensure 

correct set-up, the Operator is guided through an on-screen checklist. It also provides real-

time visual information about the decontamination stage and estimated time remaining, any 

error messages and has an emergency stop button. The process monitor is powered by a 5V 

5A CE marked power supply.

 The process monitor and main unit communicate with each other using a built in wireless 

system (which does not require access to hospital WiFi).

Section 2: 

The ProXcide

™

Содержание ProXcide


























































Отзывы:

Нет отзывов