Inivos ProXcide, Руководство пользователя, Страница: 21 / 57

APRIL 2020 • REVISION 4.0 INSTRUCTION MANUAL
21
ProXcin™ refill process
Remove empty bottle
Insert refill and push down Loosen cap
Red illumination: replace the empty bottle as follows:
Put on suitable PPE (gloves and eye protection) whilst inserting or removing refills.
Ensure the bottle carrier door is unobstructed and has space to open. Next ensure the top
LED indicators are illuminating green.
Present and hold your operator card at the card reader located above the top button to
automatically open the bottle carrier.
To remove the empty ProXcin™ bottle, first re-tighten the lid on the empty ProXcin™ bottle.
Some fluid may remain and drip from the pierced holes at the bottom of the bottle. Withdraw
the empty bottle carefully and dispose of into a locally approved waste bag.
Line up the new refill bottle with the fill hopper and lower into the bottle carrier. When the
bottle is fully lowered into the bottle carrier, firmly push down the neck of the bottle to pierce
the bottom of the bottle and drain the fluid into the unit.
Once the bottle is pierced, loosen the bottle cap to allow air intake. This will prevent a vacuum
being formed as the fluid drains from the bottle. Failure to loosen the bottle cap may result in
the bottle not draining into the main unit and the system displaying an error message.
Once correctly inserted, present
and hold
your operator card at the card reader to
automatically close the bottle carrier. Never force the bottle carrier door to close – always
allow automatic closure. The indicator lights will show the new fluid level as the refill drains
into the system. When the system has taken the entire refill, it may request another.