Inivos ProXcide Скачать руководство пользователя страница 49

Страница: 49 / 57

APRIL 2020 • REVISION 4.0

INSTRUCTION MANUAL

ProXcin

™

contains hydrogen peroxide and any spillages should be contained and disposed of in

accordance with local protocols. Never attempt to re-use spilt ProXcin

™

as this could damage the

machine and will a

ect the e

icacy of the process. Small spillages can be contained using the spill kit.

To contain a spillage:

  Wear adequate PPE (gloves, eye protection, mask and coveralls)
  Place the spill kit absorbent pads over the spillage
  Cordon o

the a

ected area to prevent access

Ventilate the area by opening windows
When pads have absorbed the ProXcin

™

, carefully place them in bags for disposal in accordance

with local legislation and procedures

Wash the a

ected area with plenty of clean water, but do not use any cleaning additive

Re-open the area when safe to do so

A larger spillage may require alternative intervention. If this becomes necessary, always show the

MSDS to the personnel involved.

5.8.6.

Use any means necessary to increase aeration of the space, such as opening windows or

external doors, so long as there is no risk of exposing third parties to harmful hydrogen

peroxide vapour levels.

However, if the reading still exceeds 1.00ppm, wait 15 minutes

outside of the treatment space, ensuring that the door is closed and the area remains

inaccessible to sta

or public before re-measuring. Repeat this process until readings are

below 1ppm.

5.8.7.

Remove any DVI tape from around windows and ventilation grilles, as necessary. Remove

the door warning signs and DoorBars.

5.8.8.

When the treatment area is clear and safe for patients again, and local protocols have

been followed, inform the sta

involved that the decontamination process has successfully

finished and it is safe for re-entry and use.

5.9

Containing a ProXcin™ spill

Содержание ProXcide


























































Результаты поиска

Содержание ProXcide

Отзывы:

Inivos ProXcide, Руководство пользователя, Страница: 49 / 57

Результаты поиска

Содержание ProXcide

Отзывы: