Infortrend EonStor DS S12S-J2000-G, Руководство по оборудованию

Страница: 141 / 216

EonStor / EonStor DS S12/S16/S24 Series
5. Power off the RAID system.
dicated by the
blue arrow
) on
Controller A. You may use a straightened paper clip to press the button. While
Restore Default button down, power on the RAID system.
6. Press and hold the Restore Default button (in
pressing the
Ctr
l St
atu
s
M S
tatu
s
CB
7. When the “
Restore Def.
” LED (indicated by the
black arrow
) lights up and the
the
n (the system default has been restored).
space
“ or
“
Restore NVRAM from Files
” in the firmware. ID/LUN mapping will be restored.
“
Default Restored
” firmware event message appear, you may release
Restore Default butto
8. Restore previous settings using the “
Import NVRAM from reserve
RAID model No.
Ready
Ent Ent
Ent
Ent
Import NVRAM
include password?
except password?
Ent
Import NVRAM
in progress
View and Edit
Logical Drives
System
Functions
Mute Beeper
Import NVRAM from
reserve space
Export NVRAM to
reserve space
Controller
Maintenance
Legend
Ent: Press the Enter (Ent) button.
Ent
: Press and hold the Enter (Ent) button for 2 seconds.
---->
: Press the up and down arrow to scroll to the menu you are after.
*The ete and for
Dual
Controller
systems, please continue with the following procedures.
9. Power of
ult settings.
Single controller system’s restore default procedure is compl
f the system.
10. Replace Controller A with Controller B (Controller B will be inserted into
Controller A’s slot) While leaving Controller B slot empty with Controller B in slot
A, perform the above steps 1 to 8 to restore Controller B to defa
11. Put both Controller A and Controller B into their original positions and power up
the system.
141