Infortrend EonStor DS S12S-J2000-G Скачать руководство пользователя страница 69

Страница: 69 / 216

EonStor / EonStor DS S12/S16/S24 Series

System model numbers with a designated “N” are powered by DC PSUs.

The kit is for DC PSU systems only and the earth lead kit

MUST

be installed before you power

on your system. The earth lead cable, dedicated screws and cage nut can be found in the

accessory box. It is recommended to install the earth lead kit once the enclosure has been

installed into the cabinet.

To install, attach one end of the earth lead cable to the enclosure and secure it with the

dedicated screw as shown in the illustration below:

Attach the other end of the earth lead cable to the

cabinet rack post with the dedicated screw. If your

cabinet rack post does not come with screw threads,

use the cage nut provided to secure it to the rack

post.

Содержание EonStor DS S12S-J2000-G

























































































































































































































Результаты поиска

Содержание EonStor DS S12S-J2000-G

Отзывы:

Infortrend EonStor DS S12S-J2000-G, Руководство по оборудованию, Страница: 69 / 216

Результаты поиска

Содержание EonStor DS S12S-J2000-G

Отзывы: