Infinity 890 BF, Руководство пользователя

Страница: 22 / 32

LT 6541 (Iss 4 07/14) 22
INFINITY 890 BF Installation Instructions
SECTION ELEVEN Check Operation of Fire
CHECK BURNER PRESSURE AND GENERAL OPERATION

Remove the screw from the pressure test point on the burner inlet elbow and fit a pressure test
gauge.

Turn on the gas to the appliance and operate as described in section three. Check that the inlet
pressure /- 1 mbar for natural gas.

Turn off the appliance and remove pressure test gauge.

Refit the screw into the pressure test point and turn on the appliance again, check that the screw
has sealed with leak detection fluid.

Turn the appliance off.

Refit the outer fascia.
SECTION TWELVE Instruct and Advise the Customer

Demonstrate the lighting and extinguishing procedure to the consumer/user and the removal and
refitting of the trim for cleaning.

Explain that for the first few hours of the fire operating there will be an initial odour. This is due to
the curing of the paint, the appliance should be operated on its high setting, and it is
recommended that a window is left open until that odour has completely disappeared.

Instruct on the glass removal and refitting.

Instruct on the shapes cleaning and advise that a vacuum cleaner can be used but only after all
the loose shapes have been removed.
Refer to ‘Health & Safety Notice (See Section One) at
the front of this booklet before proceeding.

Advise customer that with use the inside of the air box will change colour, particularly the sides
and rear. This is quite normal and often adds to the overall effects of the appliance.

Advise that the appliance should be serviced annually by a competent person i.e. a Gas safe
registered engineer in accordance with these instructions.

Although the appliance is fitted with a glass front which acts as a dress guard it is strongly
recommended that a fireguard should be used for the protection of children, the elderly or infirm.
Fireguards should conform to B. S. 6539 (1984) (Fireguards for use with solid fuel appliance).

Hand these instructions to the user.