Infinity 890 BF, Руководство пользователя

Страница: 8 / 32

LT 6541 (Iss 4 07/14) 8
INFINITY 890 BF Users Instructions
SECTION FOUR Cleaning & Laying the fuel bed
CLEANING: GLASS PANEL
From time to time it may be necessary to clean the glass panel.
We recommend you use a Ceramic Hob Cleaner (brands such as
HOB BRITE and VITRO CLEN
have been found to be acceptable) these are available from most leading Supermarkets.
Remove the glass panel as follows:

Carefully lift off the outer fascia held in place
by magnets.

Remove the 4 nuts at the bottom securing the
glass assembly.

Remove the Top 5 castle nuts on Glass
Clamp, and slide the Glass Frame & Retaining
Bracket completely off and disengage both
parts

Lay the glass panel down on a flat working
surface on top of an old opened newspaper
with the side to be cleaned uppermost.
Follow the Instructions on the Hob Cleaner
Bottle.
On stubborn stains (where the appliance has been used for a long period without glass panel being
cleaned), use a new
Brillo Pad well wetted with the Hob cleaner applied directly to it.
Ensure all the residues of the cleaner are removed with a damp cloth and the glass panel is
completely dry before fitting to the appliance.
INFINITY 890 BF Users Instructions
SECTION FOUR Cleaning & Laying the fuel bed Continued
Note: - If the loose shapes have not been placed correctly, causing the gas flame to contact the glass
this may result in glass staining that cannot be removed by cleaning.

Re-assemble in reverse order ensuring a tight seal against glass assembly.

Re-fit the fascia.
CLEANING AND REPLACING fuel bed shapes
Important: -
Refer to the ‘Health & Safety Notice located on page 3 of this booklet
before cleaning or replacing any refractory material.
Use only the shapes provided NO OTHER SHAPES SHOULD BE ADDED to the
appliance
The Fuel bed set consists of:

Log fuel bed complete set consisting of :-

11 Log Shapes. ( 9 x large shapes & 2 x small shapes. )

1 Bag of Bark Chips.