Infinity 890 BF, Руководство пользователя

Страница: 7 / 32

LT 6541 (Iss 4 07/14) 7
INFINITY 890 BF Users Instructions
SECTION THREE Operation Cont.
To Deactivate the sleep mode:
When the fire is next operated, the sleep mode will automatically appear unless it is re-set to zero.
This can be done by pressing the
O
key and using the button to decrease the time set by 15
minute intervals until back to zero.
If you experience unexplained outing on the fire please check that the sleep mode is switched off.
Child Lock (Handset)
To activate `Child Lock` : Press and hold the Mode Key
O
button for 5 seconds, this will lock and
disable the handset and a “padlock” symbol will appear on the bottom of the screen. This can be
done while the fire is “off” or “on”. To deactivate this function press and hold the Mode Key
O
for 5
seconds and the “padlock” symbol will disappear.
LOW BATTERY INDICATION (APPLIANCE)
If you hear a repeated ‘bleep’ sound come from the appliance this indicates the appliance battery
pack is low and should be changed. If this is ignored the system will go into a lock out mode, which
will not allow the appliance to be used until a new set of batteries are loaded.
NOTE: The appliance cannot be used when the battery is completely discharged.
TO REPLACE APPLIANCE BATTERIES (6 High Power Alkaline C 1.5V)
a. Remove the trim held in place with magnets.
b. Remove the battery holder from within the protective cover and replace the six high power
alkaline C batteries as a complete set.
WARNING, batteries will overheat if fitted incorrectly, when fitting the batteries ensure that
they are fitted as per the marking on the rear of the holder (i.e. minus of battery against
spring).
e. Once the new batteries are loaded the fire will continue to bleep until re-set. Press the ON / OFF
key for at least 2 seconds, on release a bleep sound will be heard and the ignition process will start. If
the fire continues to bleep this may indicate a loose connection or badly loaded batteries.
*Important : If the fire burner or pilot is extinguished for any reason, do not attempt to re-light
the pilot for at least 3 minutes.
INFINITY 890 BF
Users Instructions
SECTION FOUR Cleaning & Laying the fuel bed
Warning:- Before you clean any part of the appliance ensure that the appliance is switched off and
cool.
CLEANING: DECORATIVE FASCIA

Fascia assembly can be wiped with a soft, clean, dry, cloth only.
CLEANING: BLACK PAINTED SURFACES

These surfaces should be dusted regularly and any marks removed with a soft cloth.
Abrasive or chemical cleaner should never be used.