Infinity 890 BF, Руководство пользователя

Страница: 9 / 32

LT 6541 (Iss 4 07/14) 9
INFINITY 890 BF Users Instructions
SECTION FOUR Cleaning & Laying the fuel bed Continued
Log Fuel Bed Layout.

The Burner End Plates
should already be in
position at ends of burner
carrier and held in place
with two self tapping
screws
with the
chamfered ends towards
the front.

The Air Bridge should
already be fitted at the
rear and held in place
with two M4 x 10mm
screws at either end.

Place to Burner Bar Edge
Cover over the front of
the Burner Bar with the
slot at the left hand side
so it covers the edge.

Place a single layer of
Bark Chips on the front of
the
burner and the
outside of the Burner End
Plates, making sure they
don’t go over the Burner
Channel, the Pilot cross
lighting ports on the right
hand side of the burner or
the pilot assembly.

AVIOD PLACING BARK
CHIPS OVER BURNER
SLOT
ON BURNER
BAR.

AVOID BLOCKING
PILOT ASSEMBLEY.