Industrial Scientific DSX-L, Руководство для стартапов

Страница: 59 / 120

55
Step Instruction
At the blinking prompt, type the
number 4 and press enter. The
menu will refresh and the DHCP
will change from Enabled to
Disabled.
At the next blinking prompt, type
the number 1 and press enter.
When prompted, type in the
desired IP address, then press
enter. The menu will refresh and
will show the new IP address.
Note: There is no ability to backspace
when typing. To correct any
typographical errors, simply repeat the
task to enter the correct value.
In the same manner, type in the
number 2 to enter the Subnet
mask. Then, type in the number 3
to enter the Gateway address.
The menu will refresh after you
complete each entry and will
show the new values.
Confirm that all values are correct and that the DHCP is still showing as Disabled. If
needed, repeat any of the above tasks to correct a value
4.
Once you have confirmed the values are correct, type S and press enter to save the
configuration.
If the docking station is to be relocated to another area, disconnect the power cord. When
the station is relocated, plug its power cord into a suitable outlet.