Industrial Scientific DSX-L, Руководство для стартапов

Страница: 103 / 120

99
Step Instruction
2. Use the ARROW keys on the keypad until Docking Station is highlighted.
3. Press the ENTER key. The Docking Station menu appears.
4. Use the ARROW keys on the keypad to select Diagnose. Press the ENTER key.
5. The LCD displays a confirmation prompt: “Are you sure?” Select Yes, and press the
ENTER key.
6.
The LCD screen displays “Diagnosing.”
If the leak issue has been corrected, the
LCD screen displays the current date and time. The green LED is illuminated.
7. If the diagnostic test fails again, contact Industrial Scientific Corporation for service.
5.8. Instrument Docking Station Operating Guidelines
Use the following safety guidelines to help to ensure your own personal safety and to help
protect your Instrument Docking Station and working environment from potential damage.
CAUTION: Compressed gas cylinders and their contents may present specific hazards to the
user. Use only in a well-ventilated area. Use only in accordance with the instructions and
warnings as marked on the cylinder and the appropriate Material Safety Data Sheet.
5.8.1. General
An Instrument Docking Station (IDS) is a sensitive piece of equipment that should be treated
with care. It should be handled in the same way you would handle a laptop computer. General
guidelines are listed below.
Install or locate this device only in accordance with the provided installation instructions
found in
Administrator’s Guide
, DSX-L Local Server Mode.
•
To reduce the risk of fire or electric shock, do not expose the IDS to rain or moisture.
•
Do not operate an IDS with any cover(s) removed.
•
Avoid extremes in temperature. Operating temperature should be between 0 º C (32 º F)
and 50 º C (122 º F).
•
Do not drop the unit.
•
The IDS should be serviced only by qualified service personnel. Contact Industrial
Scientific Corporation for examination, repair, or adjustment.
•
Do not use corrosive chemicals or vapors near the IDS.
•
Do not immerse the cord or plug in water.
•
To avoid the potential hazard of electric shock, do not use a IDS during an electrical
storm without proper protection.
•
To avoid the potential hazard of electric shock, do not connect or disconnect any cables
to or from the IDS during an electrical storm.
•
To avoid possible damage to the system board, wait 5 seconds after turning off the IDS
before restarting.