Industrial Scientific DSX-L, Руководство для стартапов

Страница: 57 / 120

53
3.11.2. Running the Docking Station Configurator Software
To run the Docking Station Configurator Software, follow the instructions below.
Step Instruction
1. Choose START / PROGRAMS / INDUSTRIAL SCIENTIFIC / DS2
CONFIGURATOR. The Docking Station Configurator screen is displayed.
To tell the docking station what the IP address of the server is, select the Server IP
Address tab, and then type in:
•
the IP address of the server
•
the IP address of the docking station
and choose Send.
Figure 3-31. Docking Station Configurator Screen
2. At this point, the docking station will automatically reboot.
3.12. Assigning a Static IP Address to a Sever or PC
To assign a static IP address, you will need the desired IP address and the values for Subnet
mask and Gateway address. If these values are unknown to you, contact your IT administrator.
The following instructions tell you how to use PuTTy, a free and open-source terminal emulator,
to assign a static IP address for the DSX-L.
PuTTy can be obtained at putty.org. From their download page, select putty.exe.
Step Instruction
1. Power off the docking station : remove the power cord from the back of the unit.
Ensure the docking station is connected to your computer with a serial cable, either a
Male to Female DB-9 serial cable or a USB to DB-9 serial adapter.