Industrial Scientific DSX-L, Руководство для стартапов

Страница: 101 / 120

97
Step Instruction
2. Dock the instrument in the IDS.
3. Press any of the keys on the IDS keypad to access the main menu.
NOTE: The menu cannot be used when the IDS is performing an instrument action.
NOTE: The menu cannot be used if the Menu Locked setting for the IDS in DSSAC is set to
“Yes.”
NOTE: If two sensors are installed in the Tango TX1 when the data are logged, DSX-L will
download data for three sensors. Data from the installed sensors are logged and downloaded as
sensor 1 and sensor 2 data. Data that are logged and downloaded as sensor 3 (or VIRTUAL) are
algorithm-calculated values that are based on sensor 1 and sensor 2 data. DSSAC displays only
the VIRTUAL data.
If only one sensor is installed or working when the data are logged, the downloaded and
DSSAC-displayed data will contain only information for that sensor.
Step Instruction
4. Use the ARROW keys on the keypad until Instrument is highlighted.
5. Press the ENTER key. The Instrument menu appears.
6. Use the ARROW keys on the keypad to select Download Datalog. Press the ENTER
key.
7. The LCD displays a confirmation prompt: “Are you sure?” Use the ARROW keys
on the keypad to highlight Yes, and then press the ENTER key. If you select No, the
LCD returns to the main menu.
8. The IDS begins downloading the datalog data. The LCD displays “Downloading
Datalog.” The yellow LED is illuminated.
NOTE: The instrument’s datalog memory is also cleared. The LCD displays
“Clearing Datalog” when the datalog data is being cleared.
9. When the datalog download is complete, the LCD returns to the main menu and the
green LED is illuminated.
5.6.2. Clearing Datalog Data
To clear datalog data from an instrument’s memory without downloading it to the system, follow
the instructions listed below.
Step Instruction
1. Make sure that the IDS is on.
2. Dock the instrument in the IDS.