manualshive.com logo in svg

Impacts STREAMER S320RD, Руководство по эксплуатации

Поделиться
Скачать
Impacts STREAMER S320RD Скачать руководство пользователя страница 36

S320RD

Operating Manual

34

Chapter 7.0  Maintenance - S320RD

7.1 Recommendations

7.2 

Maintenance and Inspection

7.3 Maintenance

7.4 

The Blast Pattern

7.5 

Adjusting the Blast Pattern and Control Cage

7.6 

Adjusting Magnets and Seals

7.7 

The Belt Drive

7.8 

Fitting Belts

7.9 

Belt Tension

7.10  Belt Drive Compressor

7.11  Belt Tension Compressor

7.12  Taper-Lock Bushes

7.13  Wear Parts - Blast Housing

7.14  Replacing the Wheel Kit

7.15  Replacing the Liners

7.16  Replacing Filter Cartridge

7.17  Wear Parts - Filter Unit

7.18  The Hydraulic Tank

7.19  The Gear Box

7.20  The Compressor

7.1 Recommendations

Prior to any repair work on the machine and its drives, secure the machine against unintentional 
switch-on. Put the machine in its Safety Off Position as described in Chapter 2.

Failures due to inadequate or incorrect maintenance may generate very high repair 
costs and longer stoppage periods of the machine. Regular maintenance is essential.

•  Safety and service life of the machine depend, among other things, on proper maintenance.

•  The time indications are based on uninterrupted operation. When the indicated number of 

working hours is not achieved during the corresponding period, the period can be extended. 
However a full overhaul must be carried out at least yearly.

•  Due to different working conditions it cannot be foreseen how frequently inspections need to 

occur for wear checks, inspection, maintenance and repair works. Prepare a suitable inspection 
schedule considering your own working conditions. 

Sub-supplier’s operating & maintenance instructions should be followed during service & 
maintenance. Close attention should be paid when servicing engine & L.P. Gas system.

Содержание STREAMER S320RD





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды