Impacts STREAMER S320RD, Руководство по эксплуатации

Страница: 11 / 68

Operating Manual S320RD
9
2.8 Electrical Engineering Regulations
Work on the electrical parts of the equipment may only be undertaken by a skilled
electrician or by a trained person under the guidance and supervision of a skilled
electrician in accordance with the electrical engineering regulations.
Use only extension cables for extending the main cable that are sized and marked in
accordance with the overall power consumption of the machine following valid VDE and
local guidelines. In case there is any question, ask the manufacturer or a skilled
electrician.
Only start work once you are familiar with the electrical engineering regulations that apply to your
area.
Only use voltage seekers that comply with the regulations when troubleshooting. From time to
time, check voltage seekers to ensure that they are operationally efficient.
2.9 L.P. Gas Engineering Regulations
Regarding setup and operation, vehicles with a liquid gas combustion motor are subject to the
"common provisions" as well as the "special provisions" according to § 29 UVV "Use of liquid gas"
(BGV D34).
Inspection of vehicles with liquid gas combustion motor by the expert according to §§ 33 and 37
UVV "Use of liquid gas" (BGV D34).
2.10 For Special Attention
Use only proper and default free tools for your work. Damaged tools have to be repaired immediately
or be replaced.
Use safety equipment and clothing (e.g. safety glasses, safety shoes, safety gloves) during
operation of the machine at all times for your safety.
Please instruct your operators and the repair personnel about the following
points:
• Greasing, cleaning, and all repair work is only allowed if the machine is in the safety off position
(see Section 2.6).
• No one is allowed to open or remove safety covers while the machine is running.
• Replace all safety covers and safety devices after cleaning, repair, and maintenance work.
• Do not touch moving parts or walk into the working path of the machine.
• Before start up of the machine after any cleaning, repair, or maintenance work, ensure that no
person in the working area could be endangered by the machine.