Impacts STREAMER S320RD, Руководство по эксплуатации

Страница: 27 / 68

Operating Manual S320RD
25
7. Carefully remove the gas tank from its holder and
deposit securely.
8. Place the new gas tank in the holder and turn until the
connections on the shut-off valve point downward.
9. Attach the gas tank securely with retainer and strap.
10. Re-attach the hose as specified.
11. Carefully open the shut-off valve and test the
connection for leaks using a foaming agent.
Observe guidelines/regulations of L.P. Gas tanks
from your local supplier.
5.3 Start Up
All persons near the machine must wear safety glasses with
lateral protection, ear protection, & safety shoes. The
operator is required to wear close-fitted protective clothing.
Start up of the blast-cleaning machine should happen in the
following order:
1. Start engine.
2. Check that the magnetic valve is closed (the black lever (10)
in position (Z) - "closed").
3. Slowly open shut-off valve (2) on the gas tank.
4. Insert key (4a) in ignition/starter switch (4).
5. Turn ignition/starter switch into position "ON" (I).
6. The warning lights for charge current (5) and engine oil
pressure (9a on the combined display) light up.
7. Pull out accelerator cable (14) slightly.
8. Turn the ignition/starter switch to position "IGN" (II), at the
same time depress shortly the fuel primer button (P) of the
L.P. Gas vaporizer (V).
Only operate the starter for max. 5 seconds at a time.
Before repeating the start process, return the ignition/
starter switch to position “OFF” and wait 15 seconds.
9. Release key as soon as the engine starts. It automatically
returns to position “I.”
The warning lights for charge current and engine oil
pressure must go out as soon as the engine starts. If this is
not the case, switch off the engine and repair the fault.