Impacts STREAMER S320RD, Руководство по эксплуатации

Страница: 30 / 68

S320RD Operating Manual
28
Chapter 6.0 Operation
6.1 Daily Operation
6.2 Information about the Chart Speed
6.3 Recommended Blast Paths
6.4 Empty Out the Dust Bin
6.5 Turning Off the Machine
6.6 If Failure Occurs
6.7 Safety Shutdown
6.8 Restart
6.9 Proceedings Prior and After Longer Stoppage
6.10 Parking the Machine Safely in L.P. Gas Mode
6.1 Daily Operation
This operating manual has to be always with the machine at the job site!
Only trained personnel can operate and perform work on the machine. Note the
statutory minimum age! Clearly specify the responsibilities of personnel for operation,
setup, service, and maintenance work.
Instructions for daily operation of the blast machine:
• Check daily before starting the operation whether all machine parts are assembled safely and
correctly.
• Before switching on the machine, check that all safety covers are in the right position.
Independent of the following guidelines, local safety regulations apply to the operation
of the machine in each case
• Consider the disposal regulations as well as local regulations.
• Check the surface to be treated, for loose parts (stones, screws, etc.). The surface must be
swept if necessary. Remove all objects from the surface in order to avoid damage to the machine
seals or serious damage to blast wheel and wheel-drive.
• Regular inspections are important in order to avoid downtimes of your blast machine. See
Chapter 7 maintenance.
• Treat all plugs, cables, hoses, and operating devices with special care.
• Avoid any contact with live wires.
• In case of doubt of initial operation, see chapter 5.