Impacts STREAMER S320RD, Руководство по эксплуатации

Страница: 33 / 68

Operating Manual S320RD
31
6.5 Turning Off the Machine
1. First close the feed valve by the handle (10), push this
forward towards direction (Z).
2. Keep the traction drive switched on so the machine
moves towards (V) as long as the feed valve is not fully
closed to assure no grooves blasted into the surface.
3. Pull the traction drive lever (11) backwards to his center
position. The machine will stop. Bring the engine speed
down to 2400 min-1.
4. After completion of the work, allow the filter unit to run for
a few minutes with throttled fan. This will allow the filter
cartridges to have a better cleaning effect. This is specially
recommended when operating in an environment with
high air humidity and if the treated surface is moist.
5. Lower the engine speed to an idle. Keep running at idle
for about one minute.
Engine damage can occur from run-on or after-burning if engine is stopped suddenly
from high speed loaded operation. Reduce engine speed to idle for one minute before
shutting engine off.
6. Turn the ignition/starter switch (4) to position "Off".
7. Remove key (4a) from ignition/starter switch.
L.P. Gas Mode:
1. Close the shut-off valve (2) of gas bottle. Wait until the
engine stops.
2. Turn the ignition/starter switch (4) to position "Off".
3. Remove key (4a) from ignition/starter switch.
Adjust airflow throttle valve to previous position. Assure
all rotating machine parts have come to standstill before
inspection or maintenance work starts.
Always arrange the Safety Off Position of the machine as
described in Chapter 2.6.