Impacts STREAMER S320RD, Руководство по эксплуатации

Страница: 32 / 68

S320RD Operating Manual
30
6.3 Recommended Blast Paths
Picture shows the recommended blast paths.
• To rotate the machine: At the end of the blast path, close the feed valve. Then turn the
machine to the right (or left) and guide it in an arc to line up next to the last blasted path. Repeat
this process in order to complete the surface.
6.4 Empty Out the Dust Bin
The dust bin of the filter unit should be checked regularly.
The time intervals depend on the attached machine as well as
the surface to be treated.
1. For changing the position of the dust bin handle (7) loose
the locking levers (6) move the handle to the desired
position and retighten the locking levers.
2. Lift up, to the upright position, the rear handle (4)
carefully to drop the dust bin (3) out of the lifting device
(5). The lifting device (5) will go down. Remove the dust
bin and empty it into a provided container.
3. For reassembling push the container to the dead stop
into the lifting device. Finally push the handle (4) down
again for lifting the dust bin.
When opening the Lifting Device of the Dust Bin be aware of the increased weight.
Swivel the lever carefully upward! Consider state and local disposal regulations.