Impacts S210E, Руководство по эксплуатации

Страница: 6 / 48

S210E Operating Manual
4
The Operating Instructions must be supplemented by instructions including the duty to supervise and
report relating to particular local working practices; for example, work organization, work procedures,
and personnel allocation.
Personnel working with the machine must read the Operating Instructions before starting the work,
in particular. Chapter 2 "Safety Instructions." This must be done before starting any work with the
machine. This applies to certain activities such as setting up the machine, carrying out maintenance
work, or training staff to work with the machine.
From time to time, the working practices of the staff should be checked regarding awareness of safety
and hazards.
Personnel must tie back long hair and not wear loose clothing or any jewelry. There
is risk of injury in getting stuck or being drawn into moving machinery. Use personal
protection equipment whenever necessary and required by regulations!
Take notice of all safety and hazard notices on the machine. They must be kept complete and legible.
If safety-critical changes occur to the machine or its performance, the machine must
be shut down immediately! The cause of the fault must be determined immediately
and be repaired before starting work again.
Changes, add-ons, or conversions which might have an influence to the safety of the machine must
not be undertaken without the permission of the manufacturer. This applies in particular to the fitting
and adjustment of safety devices and to welding on major and load bearing parts.
Spare parts must always comply with the technical requirements and the specification of the
manufacturer. Original spare parts by the manufacturer are guaranteed compliant.
Inspection intervals and intervals for recurring checks specified in these Operating Instructions must
be followed. At the same time, it is necessary to meet all legal requirements. To perform maintenance
work correctly, it is important to be equipped with proper tools for the task in question.
The location and the operation of fire extinguishers must be made known at each job site. Take note
of the facilities for fire reporting and fighting fires!
2.3 Personnel Selection and Qualification
Fundamental Duties
Only trained personnel can operate and perform work on the machine. Note the
statutory minimum age! Clearly specify the responsibilities of personnel for
operation, setup, service, and maintenance work.
Clearly define the machine operator's responsibilities regarding traffic safety regulations and empower
him/her to decline instructions from third parties who are not complying with the safety requirements.