Impacts S210E, Руководство по эксплуатации

Страница: 25 / 48

Operating Manual S210E
23
6.3 Turning Off the Machine
To switch-off the machine, please follow the described procedure:
1. Release slowly the lever (1) so that it goes back into the starting position. After 5-10 seconds,
the magnetic valve closes and the blast wheel motor stops.
2. Continue to push the machine
forward until you are sure that no
more abrasive is flowing through the
magnetic valve into the blast wheel.
By doing this, you avoid blasting holes
in the floor during the switching-off
procedure.
3. Make sure that all turning parts of the
machine have come to a complete
stand still before you start with the
inspection or maintenance work.
4. To avoid unexpected restart of the
machine, push the emergency switch
(2) in the direction of the arrow(R), It
is now fixed and can be released by
turning and lifting.
In case of emergency and or other faults like vibration or very strong noises, stop
the machine immediately by pushing the emergency switch.
If the machine will not be used for an extended period of time, pull out the main
plug. Store the machine and cover by a tarp in a dry area.
6.4 If Failure Occurs
In a case of emergency, you can stop the machine
immediately by pushing the emergency switch.
To release the emergency switch, turn the red button and
move it upward.
For repair work, inspection, and all maintenance
work, make sure all turning parts are at a
standstill and secure the machine in the safety-
off position (Chapter 2).
Regardless of the following information in Chapter 7, the local safety regulations are valid in any case
for the operation of the machine.