Impacts S210E, Руководство по эксплуатации

Страница: 33 / 48

Operating Manual S210E
31
7.8 Maintenance Intervals
The motor is designed for long life. Damages of the motor can be realized through unusual noises
and faults of the function.
Keep the motor always free of dirt (overheating).
Keep the cover of the motor fan always free and do not put anything on it.
If the motor does not perform normally anymore, please contact an electrical specialist.
If the fault of the motor can not be repaired, please contact the IMPACTS – customer service.
The following table will show recommendations about time, inspection, and maintenance for the
normal use of the machine.
Inspection /
Time Period
Part Sign of Wear Repairing Action
Daily Brush sealings Wear at the lower end Replace brush seals
Fixing screws of the
liners Wear on the fixing
screws
Replace screws
10-20 hours
Blast wheel control
cage
Blades of the blast
wheel are worn 1/3;
deep groves
Replace the blast
wheel kit
50 hours
LIners in the wheel
housing Partly worn up to 1/3 of
the original thickness
Replace liners
100 hours
Rebound plate in the
separator Wear of the rebound
plate
Replace rebound plate
150 hours
Abrasive hopper
separator Wear mainly on the
welding seams Rewelding through
IMPACTS service
200 hours Feed Spout Worn out
Replace with a new
one
Rebound chamber Worn weldings
Rewelding through
IMPACTS service
7.9 Other Maintenance
• Pay attention to the wear of the brush seals and change them when the sealing is no longer
sufficient. Doing this step will prevent dust from coming to the environment and saves additional
costs.
• From time to time, you should put oil on the Dead Man Switch and other moving parts to keep
them lubricated.