Impacts S210E, Руководство по эксплуатации

Страница: 10 / 48

S210E Operating Manual
8
The electrical parts of the machine must be inspected regularly. Please note in
particular the specified recurring inspections according to BGV A3 or local
regulations. Defects such as loose connections or scorched cables must be rectified
immediately. Call a skilled electrician or the IMPACTS customer service.
If work on live parts is necessary, a second person must be deployed who can pull out
the main plug in an emergency. The working area must be sealed with a red and white
safety chain and a danger sign. Use tools that are insulated against voltages.
Only start work once you are familiar with the electrical engineering regulations that
apply to your area.
Only use voltage seekers that comply with the regulations when troubleshooting. From time to time,
check voltage seekers to ensure that they are operationally efficient.
2.9 For Special Attention
Use only proper and default free tools for your work. Damaged tools have to be repaired immediately
or be replaced.
Use safety equipment and clothing (e.g. safety glasses, safety shoes, safety gloves) during operation
of the machine at all times for your safety.
Please instruct your operators and the repair personnel about the following points:
• Greasing, cleaning, and all repair work is only allowed if the machine is in the safety off position
(see Section 2.6).
• No one is allowed to open or remove safety covers while the machine is running.
• Replace all safety covers and safety devices after cleaning, repair, and maintenance work.
• Do not touch moving parts or walk into the working path of the machine.
• Before start up of the machine after any cleaning, repair, or maintenance work, ensure that no
person in the working area could be endangered by the machine.