Impacts S210E, Руководство по эксплуатации

Страница: 30 / 48

S210E Operating Manual
28
7.5 Changing the Blast Wheel
The blast wheel set consists of the blast wheel and the control cage.
Demounting:
1. Remove the feed spout (1) by pulling it out
of the housing.
2. Loosen the cage clamps (2).
3. Remove the control cage (3).
4. Unscrew the screws (4) of the front plate (5)
and set aside.
5. Fix the wheel (7) with a piece of wood.
6. Loosen the fixing screw of blast wheel (6).
7. Remove the blast wheel (7).
8. Check the wheel hub (8) for wear.
9. Check the sealing (10) for wear.
Mounting:
Before you start mounting clean all threads and use a new blast wheel fixing screw, replace the
sealing (1) if it fit is worn.
1. Put the wheel hub (2) on the shaft of the
wheel motor. Make sure that it is in the right
position on both sides. In order to control it,
turn the wheel hub. It must turn the wheel
motor as well.
2. Put the blast wheel (3) through the opening
of housing on the pins of the wheel hub (2).
3. Fix the wheel (3) with the blast wheel fixing
screw (4).
4. Fix the front plate (5) with the four fixing
screws.
5. Put in the control cage (6).
6. Clamp the control cage with the cage
clamps (7). Check the distance to the
impeller of the wheel and make sure that
the wheel can rotate freely. Fix the cage
clamps correctly & securely.
7. Replace the feed spout.