![background image](http://html1.mh-extra.com/html/illumina/cbot/cbot_system-manual_2044028011.webp)
c
B
o
t
2
C
o
m
p
o
n
e
n
ts
cBot 2 System Guide
5
Figure 3
Thermal Stage
A
Output clamp
B
Flow cell adapter plate and manifold
C
Flow cell clamp
D
Thermal stage
E
Sipper comb
The manifold is a single-use component that delivers reagents from the reagent plate to the
flow cell. The sippers on the sipper comb pierce the foil-sealed reagent tubes seated in the
reagent plate. The outlet end of the manifold transfers waste to the waste container. The
outlet clamp locks the outlet end of the manifold in place.
Flow Cell Adapter Plates
The cBot performs cluster generation on GAIIx and HiSeq flow cells. When switching flow
cell types, change the adapter plate on the flow cell stage. For details, see
.
Reagent Stage
The reagent stage holds the cBot reagent plate. The reagent plate is locked into position by
the reagent plate lever. Two 8-tube strip holders in front of the reagent plate hold prepared
library template and additional primers. The left side of the template row is keyed to ensure
the correct orientation of the 8-tube strip used with the sample tracking workflow.
Figure 4
cBot 2 Reagent Stage
A
Reagent plate lever
B
Template row
C
Primer row
D
cBot reagent plate
Содержание cBot
