900861-00D
17
IHP.us.com
Step 6:
Carefully push the LED channel connector through the
wire grommet. As you push it through the grommet sit the LED
channel into the bottom of the glass clip. Ensure the other end
of the channel is also sitting inside the other retainer clip.
See
Figures 21 & 22 as a reference.
Note:
If you are installing into
a see-through fireplace, install the other LED light strip and
channel the same direction to ensure wires will connect.
Figure 21 - Installing LED lights and channel
Figure 22 - LED installed in retainer clip inside fireplace
Step 5: Remove the LED right channel assembly from the carton (The front of the channel has a shield facing the front with the LED
wire hanging on the right side). See Figure 20 and Figure 21 for details. NOTE: If you are installing into a see-through fireplace you will
install both right and left channels assemblies.
LED LIGHTING INSTALLATION
Continued
Figure 20 - Shows LED right channel
LE
D C
ha
nn
el
LED Channel
Sits Here
Botto
m En
d
LED Channel Assembly
Installed in retainer clip