900861-00D
23
IHP.us.com
FINAL PREPARATION
Step 20:
Install the burner pan back into the fireplace.
See Fig-
ure 30.
Figure 33 Pilot hood installed, showing ventilation at front
edge of burner pan.
Figure 30 Shows burner pan installed into fireplace.
Pilot Hoo
d
Burn
er Pa
n
Step 21:
Install ignition screen (from parts box) overtop of the
burner tube with the cutout area centered behind the pilot box
ignition hole as shown in
Figure 31.
The ignition screen sit on
top of the burner tube.
Fig. 31 Installing ignition screen.
Step 22:
Place pilot hood on top of the pilot box and ensure if sits
flat, providing ventilation for the pilot at the front edge of the
burner pan.
See Figures 32 and 33.
Figure 32 Pilot hood installing over top of pilot box.
NOTE: The pilot hood will have a plastic film that must be re-
moved before installing.
Remove the plastic film from the pilot hood and place hood on
top of the pilot box as shown in
Figure 32.
Pilot
Burn
er Pa
n
Ignition Hole
Media
Barrie
r
Burn
er Pa
n
Pilot H
ood In
stalled
Ignition Screen
