IHOS Quadro DSP 6.4 1500W Series, Руководство пользователя

Страница: 37 / 37

M
DSP DIGITAL POWER AMPLIFIER
Page 36 /
BYPASS
Bypass function, the channel EQ is straight after turned on, default red
state means turned on, and it needs to be turned off manually when using
FIR
STORE Save FIR parameters in the device
Taps Tap numbers of current channel
Ms Delay of current channel
Name FIR preset file name of current channel
Channels ② 1, 2, 3, 4
Click to display the FIR curve of the corresponding channel, and support
multiple curves to be displayed at the same time
Function ③
Design Design interface switch button
Magnitude Interface show with amplitude curve
Phase Interface show with phase curve
72dB Show content within 72dB of amplitude accuracy
144dB Show content within 144dB of amplitude accuracy
Curve ④
-108 ～ +36
Amplitude accuracy, the value used for reference when the current
display is an amplitude curve
-180° ～ +180°
Phase accuracy, the value used for reference when the current display is
a phase curve
20Hz~20KHz Frequency band
Design ⑤
High pass
Frequency band
Low pass
Flat
Freq(Hz) Start frequency setting, high pass on the left, low pass on the right
Num.Taps Taps numbers, total 8 steps, optional 256～2048
ALT.(dB) Depth, only available in Kaiser window
Windows Type Window type selection
STORE Save, after setting the parameters, click to save to the device channel