M
DSP
DIGITAL
POWER AMPLIFIER
Page
24
/
to intuitively adjust the delay value of the corresponding channel, or enter the
corresponding value in the value box
, and the delay function is on the right. Switch, red is off, green is on,
the reset button
on the far right can directly reset the default value of the channel delay.
Note: ft = inches, cm = centimeters, ms = milliseconds
7.8 Output compressor
Double-click in the module button
, the following Figure 7.7 output compressor setting module will pop up.
Figure 7.7 Output compressor setting module
7.9 Output limiter
Double-click in the module button
, the following Figure 7.7 output limiter setting module will pop up.
