M
DSP
DIGITAL
POWER AMPLIFIER
Page
20
/
the value.
7.4 Input channel PEQ
Double-click in the module button
to pop up the input equalizer setting module as shown in Figure 7.3. The
button in the upper right corner
of the module can magnify this module, and the interface display will be clearer
after magnification.
Figure 7.3
Input PEQ setting module
7.4.1 Function button
As shown in Figure 7.3 above, the functions of the top buttons are:
Phase curve: display the phase curve of the current channel.
Show control points: show or hide all balance control points.
Full bypass: turn on or off all equalizer EQ of the current channel at the same time
EQ preset: save the current equalizer setting parameters to the computer, and recall and overwrite the existing equalizer
parameters.
Copy: copy the current equalizer parameter value and paste it into other input channels.
Paste: used in combination with the copy button to paste the equalizer parameter values copied by the copy function to
the current channel.
Reset: reset the equalizer parameters to the default parameter values.
