M
DSP
DIGITAL
POWER AMPLIFIER
Page
23
/
The numerical value box with the value is the input and output channel mixing key. When the mixing key is lit (double-
click the value box to switch the state), the input channel and the output channel signal realizes the mixing function.
The right part of the above figure contains the gain, reset button, and clear button of the matrix mix. Click the value box
on the left, and then drag the sliding block of the matrix mix gain or enter a value in the value box to adjust the matrix
block Click the reset button to reset the matrix mixing function to the initial one-to-one state; click the clear button to
clear all the matrix mixing functions, and there is no correspondence between the input and output of the device.
7.6 Output PEQ
Double-click the module button
, and the module interface of the output equalizer setting module will pop up.
The function and operation method are the same as the 7.5 input equalizer.
7.7 Output delay
Double-click the module button
, the module interface of the output delay setting module will pop up.
Figure 7.6 Output delay setting module
As shown in Figure 7.6 above, the delay control content of all output channels is listed. Drag the slider on the left
